Pokemon card dimensions are 63 mm wide by 88 mm tall, or 2.5 by 3.5 inches, for every standard card printed since the 1990s. That one measurement decides which sleeves you buy, which toploaders fit and whether a suspicious card in your binder is real.
This guide goes well beyond the basic numbers. You will find sizes in inches, centimeters, millimeters and pixels, plus print bleed, jumbo variants, sleeve and storage sizes, comparisons with everyday objects and simple tests for spotting fakes.
Pokémon Card Size at a Glance: Quick Measurements
A standard Pokémon card is about the size of a poker playing card. Here are the numbers most people are looking for.
| Measurement | Standard Pokémon card |
| Width x height (inches) | 2.5 x 3.5 in |
| Width x height (millimeters) | 63 x 88 mm |
| Thickness | About 0.3 mm (0.012 in) |
| Weight | Roughly 1.7 to 2 g |
| Corner radius | Roughly 3 to 4 mm |
| Aspect ratio | About 5:7 |
In short, Pokemon card dimensions are 63 x 88 mm (2.5 x 3.5 in), with a thickness of about 0.3 mm.
These are manufacturing averages, so a real card can vary by a fraction of a millimeter from one print run to another.
Standard Pokémon Card Dimensions: Exact Measurements Explained
The official size follows the common trading card format, shared with Magic: The Gathering and many other games. The width is 63 mm and the height is 88 mm, which equals 2.48 by 3.46 inches.
Most people round this to 2.5 by 3.5 inches, and that rounded figure is what sleeve and binder makers use.Three details matter beyond width and height:
- Orientation: The 88 mm side is the height when the card is held upright, with the artwork on top.
- Tolerance: Printing and cutting leave a small margin of error, so one card may measure 62.8 mm and another 63.2 mm.
- Edges: The cut is clean and straight, with softly rounded corners.
Why does this precision matter? Printers, sleeve makers and grading companies all build their tools around one fixed size.
When the card size stays the same, a collector can buy protection online without holding the card against it first.
That same consistency is what makes a card that is off by several millimeters stand out so quickly.
A card from 1999 and a card from this year fit in the same sleeve, which is why standard Pokemon card dimensions have become a reliable reference for the whole hobby.
Pokémon Card Dimensions in Inches, Centimeters, and Millimeters
Different regions and tools use different units. This table keeps everything in one place.
| Unit | Width | Height |
| Inches | 2.48 in (about 2.5) | 3.46 in (about 3.5) |
| Centimeters | 6.3 cm | 8.8 cm |
| Millimeters | 63 mm | 88 mm |
| Points (PostScript) | 178.6 pt | 249.4 pt |
Quick conversion tip: divide millimeters by 25.4 to get inches. For example, 88 divided by 25.4 gives 3.46 inches.
If you work with Pokemon card dimensions across countries, always check which unit a seller or template uses before you buy.
Pokémon Card Pixel Dimensions for Digital Design and Printing
Pixels depend on resolution, because a card has a fixed physical size but a screen or printer decides how many pixels fill it. For printing, 300 DPI (dots per inch) is the standard target. At 300 DPI, a standard card needs 744 x 1039 pixels.
Designers who plan custom cards should always work above the final size and add a bleed area, covered below. Getting the Pokemon card dimensions right in pixels before you start drawing saves you from blurry prints and awkward cropping later.
Pokémon Card Pixel Size at Different Resolutions
Use this table to match the file size to your purpose.
| Resolution | Pixel size | Best for |
| 72 DPI | 179 x 249 px | Web previews |
| 150 DPI | 372 x 520 px | Draft prints, screen mockups |
| 300 DPI | 744 x 1039 px | Standard home or shop printing |
| 600 DPI | 1488 x 2079 px | High-detail artwork, large scans |
If you are unsure, pick 300 DPI. It prints sharply without making files unnecessarily huge.
Pokémon Card Print Bleed and Safe Margins
Bleed is extra artwork that extends past the cut line, so a slightly off-center cut does not leave a white edge.
A common bleed is 3.5 mm on each side, which makes the full canvas 70 x 95 mm, or 827 x 1122 pixels at 300 DPI.
Follow these three zones:
- Bleed area: Extend backgrounds and borders to the outer edge.
- Trim line: The 63 x 88 mm final cut.
- Safe margin: Keep text and important art at least 3 mm inside the trim line.
Rounded corners add one more rule. Keep key details away from the corners, since the corner radius removes a little of the artwork.
Setting Up Pokémon Card Dimensions in Procreate
Procreate lets you set a custom canvas in a few taps, so it works well for fan art and custom cards.
- Tap the plus icon in the gallery and choose the custom canvas option.
- Set the unit to millimeters and enter 70 for width and 95 for height, which includes the bleed.
- Set the DPI to 300 and check that the maximum layer count suits your plan.
- Add a guide layer with a 63 x 88 mm rectangle centered inside the canvas.
- Draw a second, smaller rectangle 3 mm inside it as your safe area.
Export a flattened PNG or PDF for printing, and hide the guide layer first. If you want a simpler workflow for Pokemon card dimensions, save this canvas as a template and duplicate it for each new design.
Complete Guide to Pokémon Card Sizes: Standard, Jumbo, and Other Variants
Almost every Pokémon card follows one size, but a few special products do not. Knowing the difference saves you from buying the wrong protection.
Standard Pokémon Trading Card Size
The standard Pokémon trading card size is 2.5 x 3.5 inches (63 x 88 mm). This covers booster pack cards, theme deck cards, promos, holographic cards, full art cards and secret rares. Extra effects such as foil or textured surfaces change how a card feels, not how big it is.
Different Pokémon Card Sizes and Special Variants
Oversized or oddly shaped products exist, but they are the exception.
| Variant | Size | Notes |
| Standard | 63 x 88 mm | Used in play and trading |
| Jumbo (modern) | About 146 x 203 mm (5.75 x 8 in) | Sold as box toppers and collector items |
| Jumbo (older) | About 152 x 203 mm (6 x 8 in) | Sizes vary by era |
| Multi-piece cards | 63 x 88 mm each | Several standard cards combine into one picture |
| Mini and novelty cards | Varies | Sold as merchandise, not for play |
Jumbo sizes are reported slightly differently across collector guides, so check the listed measurements on any product before you buy a sleeve for it.
How Big Is a Pokémon Card? Size Comparisons With Everyday Objects
Numbers are easier to picture when you compare them with things you already own. Here are five simple comparisons.
Pokémon Card Size Compared With a Standard Credit Card
A standard credit card measures 85.6 x 54 mm. A Pokémon card is about 9 mm wider and 2.4 mm taller, so it looks noticeably more upright than a bank card.
They are similar in thickness feel, though a plastic card is usually stiffer.
Pokémon Card Size Compared With a US Dollar Bill
A US dollar bill measures about 156 x 66 mm. It is far longer than a Pokémon card but only about 3 mm wider. Place a card along the width of a bill and it covers nearly half the length.
Pokémon Card Size Compared With a Smartphone
Most modern smartphones measure about 145 to 160 mm tall and 70 to 78 mm wide. A Pokémon card is slightly narrower and about 60 percent as tall as a typical phone.A card fits easily on top of a phone screen.
Pokémon Card Size Compared With a Regular Playing Card
A poker-size playing card is about 63.5 x 88.9 mm, so it is nearly identical to a Pokémon card. Bridge-size playing cards are narrower at around 57 mm. This is why many players use the same sleeve brands for both.
Pokémon Card Size Compared With a Post-it Note
A classic Post-it note is 3 x 3 inches (76 x 76 mm). The card is narrower but taller. Stick a note over a card and you will see about 13 mm of the card poking out at the top and bottom.
Japanese vs. English Pokémon Cards: Are the Dimensions the Same?
Yes, they are the same. Japanese and English cards both measure 63 x 88 mm, so the same sleeves, toploaders and binder pages work for both.
There is no separate Japanese size for Pokémon. In other words, Pokemon card dimensions do not change by language, so you can mix both in one binder.
The confusion usually comes from small-size sleeves sold for other Japanese games such as Yu-Gi-Oh. Those sleeves are narrower and will not fit Pokémon cards comfortably.
Small differences do exist in finish. Japanese cards often feel slightly different in texture, and print quality can vary by set. These differences are about material and printing, not size.
Pokémon Card Sleeve and Storage Dimensions: Finding the Right Fit
Sleeves and holders are built a little larger than the card so it slides in without bending. The gap should be small, because a loose fit lets the card shift and wear at the edges.
Pokémon Card Sleeve Sizes by Type
| Sleeve type | Typical size | Use |
| Penny sleeve | About 67 x 92 mm | Cheap first layer for single cards |
| Standard deck sleeve | 66 x 91 mm | Play and everyday protection |
| Perfect-fit inner sleeve | About 63 to 64 x 88 to 89 mm | First layer under a standard sleeve |
| Japanese small sleeve | About 62 x 89 mm | For other games, too tight for Pokémon |
Collectors often double-sleeve valuable cards. A perfect-fit inner sleeve goes on first, then a standard sleeve covers it.
Pokémon Card Toploader Sizes and Measurements
The common toploader is 3 x 4 inches (76 x 102 mm) and holds up to 35 pt thickness. Some stores sell thicker versions for sleeved cards or cards with extra material.
A 35 pt rating means the holder is made for about 0.035 inches (0.9 mm) of thickness.Place the card in a perfect-fit sleeve first, then slide it into the toploader from the top.
Do not force a thick or bent card inside. A rigid holder will not forgive extra pressure.
Pokémon Card Dimensions Compared With Other Trading Card Games
Most big trading card games share the same basic size, but not all do.
| Game | Approximate card size |
| Pokémon TCG | 63 x 88 mm |
| Magic: The Gathering | 63 x 88 mm |
| Disney Lorcana | 63 x 88 mm |
| Digimon Card Game | 63 x 88 mm |
| One Piece Card Game | 63 x 88 mm |
| Yu-Gi-Oh! | 59 x 86 mm |
| Weiss Schwarz | 59 x 86 mm |
A difference of 4 mm in width may sound tiny, but it is enough to make a sleeve feel loose or tight. Yu-Gi-Oh! cards are slightly smaller, which is why they use smaller sleeves.
If you collect several games, check the sleeve label for the card size instead of assuming one pack fits all. Pokemon card dimensions are the same as Magic, so those sleeves are interchangeable.
How to Identify Fake Pokémon Cards by Checking Their Dimensions
Counterfeits are often close, but few fakes match every physical detail. Checking Pokemon card dimensions is quick, free and needs nothing more than a ruler, so it is a smart first step before you spend money on a card.
Size is a good first check, though it works best alongside the other tests below. If one test fails, look at the others before deciding.
Checking Pokémon Card Width and Height
Measure with a ruler or calipers. A real card should be near 63 x 88 mm. A difference of 1 mm or more in either direction is a warning sign. Compare it to a card you know is real by placing them edge to edge.
Pokémon Card Thickness Test for Authenticity
A real card is about 0.3 mm thick. Fakes can feel noticeably flimsier or unusually stiff. Stack the questionable card with a few known real cards and see if the stack looks even.
Thickness alone is not proof, but a clear mismatch is a strong hint.
Pokémon Card Weight Test: Real vs. Fake
An authentic standard card weighs roughly 1.7 to 2 g. Use a kitchen scale that reads to 0.1 g. A card far outside that range deserves a closer look. Always weigh it without a sleeve.
The Light Test for Identifying Fake Pokémon Cards
Hold the card in front of a phone flashlight in a dim room. Genuine cards are layered with a dark inner core and block most of the light.
Fake cards often glow brightly or show a washed-out texture. This is a helpful test, but do not rely on it alone.
Checking Pokémon Card Corner Radius and Shape
Look closely at the corners. Real cards have a consistent, softly rounded corner of about 3 to 4 mm. Fakes may have sharp corners, overly round corners or uneven edges.
Compare all four corners and check that the card lies flat.
How to Measure Pokémon Card Dimensions Without Calipers
You do not need special tools. A basic ruler and a little care work well.
- Use a metal or clear ruler. Place the card flat against the zero mark and read the width, then the height.
- Use a printed template. Print a 63 x 88 mm outline at 100 percent scale (no “fit to page”) and lay the card on top.
- Compare with a known card. Align the edges with a real standard card. Any gap is easy to spot.
- Stack test for thickness. Ten cards should stack to about 3 mm. Measure the stack and divide by ten.
- Use a kitchen scale for weight. This gives you a second data point without any measuring tool.
If you only have a phone, take a straight-down photo of the card next to a ruler and zoom in to read the edges. This is not as exact as calipers, but it removes most guesswork.
For the best accuracy, read the ruler straight on, not from an angle. Measuring Pokemon card dimensions at home is fine for a quick check, but grading services use more precise tools.
How Thick Is a Pokémon Card? Standard Thickness and Measurements
A standard Pokémon card is about 0.3 mm thick, which is roughly 0.012 inches or 12 point cardstock. This is thin enough to flex, but sturdy enough for repeated play.
Knowing the thickness of a card matters for more than fake detection. It decides which toploader, one-touch case or grading holder will close properly around it.
Pokemon card dimensions include this third measurement, even though most people only quote width and height.Thickness changes a little with age and handling:
- Mint cards: Close to the factory thickness.
- Played cards: Slightly thinner or compressed at the edges.
- Water-damaged cards: Swollen or warped, which can be much thicker.
Sleeves and holders add thickness. A sleeved card is about 0.5 mm, which still fits easily in a 35 pt toploader. For reference, 35 pt is about 0.9 mm.
What Size Sleeves Fit Pokémon Cards? Standard and Perfect-Fit Options
Most players choose a standard deck sleeve at 66 x 91 mm. It protects the card and slides in without friction. For collectible cards, add a perfect-fit sleeve underneath.
Do not buy sleeves by brand name alone. Two products can both say “standard” and still differ by half a millimeter, so read the exact size on the label and compare it with the card.
Pick sleeves by purpose:
- Playing: Standard deck sleeves with a matte finish for easier shuffling.
- Collecting: Perfect-fit inner sleeves plus a standard outer sleeve.
- Mailing or storing singles: Penny sleeves with a toploader.
Always check the product page for the stated card size. Packaging that lists “standard size” will fit Pokémon cards. Packaging that says “small” or “Japanese size” will usually be too tight.
Jumbo Pokémon Card Dimensions: Older vs. Newer Sizes
Jumbo cards are oversized collectibles, and they are not legal for tournament play. They often come as box toppers or promo items.
Collector references commonly list modern jumbo cards at about 5.75 x 8 inches (146 x 203 mm) and older jumbo cards at about 6 x 8 inches (152 x 203 mm). A few special releases have used other sizes, so measure your card before buying a sleeve or frame.
Because jumbo cards are sold as collector pieces, many owners display them in frames or large pages instead of playing with them. If you keep one on a shelf, avoid direct sunlight, which can fade the artwork over time.
Practical tips:
- Use jumbo sleeves: Standard sleeves will not fit.
- Check the binder: Jumbo binders may be built for one era, so confirm the page size.
- Keep them flat: Large cards bend easily, so store them upright with support.
Pokémon Card Dimensions for Binders, Toploaders, and Protective Cases
Storage products are designed around the standard size, so you rarely need to do math. Still, a few details help.
| Storage type | What to know |
| Binder pages | Pockets are made for standard cards, sometimes fitting a thin sleeved card |
| Toploaders | 3 x 4 inches, 35 pt for standard cards |
| One-touch magnetic holders | Rated by thickness, such as 35 pt |
| Deck boxes | Sized for sleeved cards, so check the sleeve count |
| Graded slabs | Larger than raw cards, so they need dedicated cases |
Buy by thickness and size labels, not by brand. If you are comparing Pokemon card dimensions with holder specs, always include the sleeve thickness in your estimate.
Do Pokémon Card Sizes Differ by Language, Set, or Release Year?
For standard cards, the answer is no. English, Japanese and other language cards use the same size.
Cards from the original base set and from newer sets also match, so old and new cards fit in the same sleeve and binder.What can change is the feel.
Card stock, finish, foil patterns and holographic textures differ across eras and printers. These details do not change the 63 x 88 mm size, but they can change how a card handles in a sleeve.
Frequently Asked Questions
What are the official Pokémon card dimensions?
A standard card is 63 x 88 mm, or 2.5 x 3.5 inches.
How big is a Pokémon card in centimeters?
It is about 6.3 cm wide and 8.8 cm tall.
What size sleeve fits Pokémon cards?
A standard deck sleeve at about 66 x 91 mm fits well, and perfect-fit sleeves work as an inner layer.
Are Pokémon cards the same size as Magic: The Gathering cards?
Yes, both use roughly 63 x 88 mm.
How thick is a Pokémon card?
A standard card is about 0.3 mm thick.
Are Japanese Pokémon cards a different size?
No, Japanese and English cards share the same size, and the same sleeves fit both.
What size is a jumbo Pokémon card?
Modern jumbo cards are commonly listed at about 5.75 x 8 inches, but sizes vary by release.
How much does a Pokémon card weigh?
A standard card weighs roughly 1.7 to 2 g, which is a handy check when you compare Pokémon card dimensions across different cards.
What size toploader do I need for a Pokémon card?
A 3 x 4 inch, 35 pt toploader fits a standard card.
Conclusion
Pokemon card dimensions are simple once you know the key numbers: 63 x 88 mm, about 0.3 mm thick and roughly 1.7 to 2 g. With these figures, you can choose the right sleeves, build a print-ready design and spot a suspicious card in seconds.
Whether you are sleeving a deck, printing a custom design or checking a trade, accurate Pokémon card dimensions keep every decision simple.
Keep the tables in this guide handy, and measure before you buy any jumbo or specialty item. A few careful checks protect your collection and your wallet.